Regardless of whether you’ve had the windows in your home for a month, a year, or a decade, you should get into the habit of inspecting them every now and then to ensure that they’re in good, working condition. By doing this, you can increase the lifespan of your windows and avoid potential problems with them.

Do you know what to look for when inspecting your windows? If not, take a look at a few of the steps you should take when doing a window inspection below. By checking out these parts of your windows, you can spot issues quickly and either seek window repair or replacement, depending on the damage.

Check window panes for signs of cracking or chipping.

The panes of glass that go inside of your windows in Tustin, CA are obviously one of the most important aspects. The glass is designed to hold air inside your home and keep the outside air where it belongs. If you have any cracks or chips in your windows, you should address it right away. You usually won’t have to replace an entire window due to a crack or chip, just the glass. But it’s important to replace it as soon as possible to prevent your energy bills from skyrocketing.

Evaluate the rubber seals holding the window glass in place.

While your windowpanes might be in good condition, there’s a chance the rubber seals used to hold them in place could be problematic. These seals should be present and they shouldn’t show any signs of cracking. If they do, you might want to have them replaced so they don’t allow the glass in your windows to fall out or become damaged.

Look for gaps around the outside of the window frames.

When windows are first installed, a window company in Tustin, CA will caulk around the outside of the window frames. This caulk will usually last a long time, but it can break down over time as well. Heat, moisture, and other elements can cause the caulk to dry out and eventually, it will disappear. If you notice that your caulk is no longer around your window frames, you should look into having them caulked again. This will provide you with an airtight seal.

Take a look at the hardware attached to your windows.

There are several pieces of hardware on your windows that will need to be maintained. From your window locks to the cranks that are used to open your windows, keep an eye on the hardware to make sure it’s functioning properly. If not, you can often replace hardware. But if your windows are breaking down more and more often, window replacement might be a better option.

Are you considering doing new window installation in your home? Pacific Shores Windows & Doors can provide you with a wide selection of windows in addition to the installation you need. Reach out to us at 714-841-2228 today or visit us at 10573 Ellis Ave Fountain Valley, CA 92708 to get started.

For more details, you can check Tustin, CA replacement windows.